The Wulf Micro Cartridge Vaporizer is two inches tall and one inch wide. The voltage can be adjusted between 3.4V, 3.7V, and 4V. Five clicks turns it on and an additional two presses starts the heating process, which takes 15 seconds. The 510 threaded device will accommodate up to 14mm cartridges. It is charged with the included Micro USB charging cable.
First time charging:
Plug the device in for two hours. Following the initial charge, the device will reach its maximum charge in one hour. When the battery is not fully charged, the side LED display will display the color red. Twenty rapid flashes of the LED light signifies that the battery is fully depleted. Warning: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
Adjusting the voltage:
To cycle through each of the three voltage options, press the button three times. When the side LED indicator light displays green, the voltage is 3.4; when the LED light is blue, the voltage is 3.7; and finally when the LED light is red, the voltage is 4.
Cartridge:
The cartridge is a c-cell unit which means it utilizes ceramic in order to give users a more pure flavor with velvety vapor. The cartridge is simply broken down into pieces for not only refills of a vaper’s preferred concentrate, but also cleaning. The 510 threading can accommodate other cartridges and tanks, however, they must have an air hole to be compatible.
